Blog Information

• Posted By : licheng flatprinter
• Posted On : Aug 04, 2021
• Views : 231
• Category : Other Blogs
• Description : In the current situation of unstable workers, the fully automatic elliptical Stenter highlights the great advantages of less labor and stable quality.

Overview

• One: save labor

  In the current situation of unstable workers, the fully automatic elliptical Stenter highlights the great advantages of less labor and stable quality. When there are not enough workers, the machine can incorporate the time spent on uncovering the film into the time spent on uncovering the film, so that the uncovering and uncovering are operated at the same end. At this time, only two people are required to operate.

  Second: Extremely power saving

  Because we adopt private server electronic control, the energy-saving and safe power consumption of the whole machine is controlled at 5.0KW, and the electricity bill is generated for how many pieces are printed, and the drying time only takes a few seconds to dry the surface. For different pastes, printing areas, With graphics and other conditions, the number and power of the lamps can be controlled at will to achieve energy-saving effects and save every penny for the purchaser.

  Third: safe and reliable

  In the entire oval printing machine, except for the 380V motor drying, all other electrical appliances are 24V. A 380 volt motor can be directly grounded, which has ensured its safety. In addition, the engineer installed a safety control switch on the corresponding part of the automatic printing machine. During the operation of the machine, if it exceeds the set range, the machine will automatically stop until the fault is eliminated, the machine can start and operate normally.

  Fourth: Easy to load and unload the printing plate

  According to the feedback and requirements of many printing factories, the machine adopts the method of positioning the two ends of the printing plate and positioning at three points up and down. It is the same as manual printing. As long as the printing plate is placed in a fixed position according to the setting method of the machine, four The four corners of the printing plate can be fixed by bolts. When unloading the printing plate, you only need to loosen the four bolts and take off the printing plate. You do not need to re-register the plate next time, which is easy to operate.

  Fifth: Ink scraping and ink back of the scraper

  The pressure of the squeegee of the automatic printing machine can be adjusted at will. The engineer also made great improvements to the scraper frame and cylinder of the machine. Now this fully automatic printing machine can not only make the scraping and ink return of the scraper obvious, but also can adjust the pressure of the scraper at will. When printing on textiles with thick lines, we reduce the pressure of the squeegee to increase the amount of color leakage. When applying thin lines, we increase the pressure of the squeegee to reduce the amount of color leakage, and the thin lines will appear clearly.

  Sixth: affordable and durable

  For the benefit of the printing factory, the material used for the machine is exquisite. Most of the parts are general accessories for the printing machine, so that the machine is durable during operation. Under normal circumstances, there is no need to replace the parts, just follow the instructions for normal maintenance.

  Seventh: easy maintenance

  Flat Screen Printing Machine adopts PLC control, and most of the components are imported ABB modules of common high quality in the market. Since the lamp is a vulnerable part (warranty within 8000 hours), it is a well-known product and it is very convenient to purchase and replace. Generally speaking, whether it is the mechanical part or the electrical part, its accessories are universal, so that once the machine fails, it is very convenient to repair.